The Circuit in general

 This is my prototype circuit. Since the design is currently just a paper project (as of May 10, 1998), I will not waste time with long-winded remarks about it. Here is the schematic.  It should end up with a quasi-3rd order acoustic crossover at 2,000hz with the drivers slightly more than 68 degrees out of phase at the crossover point. However, I may add a phase correction circuit to the high-pass which will increase the phase into the 90 degree range. This should both flatten the crossover point and create a more symmetrical vertical dispersion. Here is the circuit topology. I also have added a bass limiting capacitor with a bypass switch to the woofer's ciruit. It is a 250 uf electrolytic capacitor coupled with a 25uf poly. capacitor. The switch is a SPST which simply circumvents the coupled-capacitor.